Verify Using Message Injection

If you are having trouble receiving on your specified Destination, or just want to test without sending via the real satellite or the Satellite Simulator, you can verify your destination using message injection. Injected messages are received at the configured destination almost instantaneously.

There are two methods for injecting messages:

  1. Using the Device Manager
    • Select Devices on the left hand navigation menu
    • Click on the 'Inject Message' icon against the device you wish to inject from
    • Enter your hex string on the Inject Message pop up, and click OK.
  2. Using command line
    • Use the following to inject a hex string via the command line, where ID identifies the device to wish to inject from:
    echo "48656c6c6f2c737061636521" | message_inject.py <ID>